| |
|
|
|
| |
Leaf Spring
Manufacturing Plant & Machinery |
|
| |
|
|
|
| |
|
|
|
|
 |
Oil heating &
pumping unit |
|
| |
|
|
|
|
| |
|
Oil heating &
pumping unit is required for supplying hot pressurized furnace
oil to the burners of various furnaces with 3 HP motor and
necessary piping with duplex type pump |
|
| |
|
|
|
| |
|
Capacity : |
|
| |
|
As per size of
burners selected by the client. |
|
| |
|
(Note : machine can be designed as per client requirement ) |
|
| |
|
|
|
| |
|
Applications
: |
|
| |
|
To supply hot
pressurized furnace oil to the burners of various furnaces |
|
| |
|
|
|
|
|
|
Testing machines |
|
| |
|
|
|
|
| |
 |
Brinell
Hardness tester |
|
| |
|
 Brinell Hardness
tester complete in all respects as per our standard practice of
supply . there are two models manual and automatic. |
|
| |
|
|
|
|
| |
|
Applications
: |
|
| |
|
 During quality
control of leaf springs, it is essential to check if the leaf
springs have gained the required strength. This is done by
checking the BHN Number of the leaf springs. If the BHN number
is between 380 to 425, then the leaf spring is accepted. |
|
| |
|
|
|
|
| |
|
Scragging
Machine |
|
| |
|
Scragging Machine
with 2 HP motor hydraulic power pack with dial indicator for
measuring load exerted on the spring assembly ,complete as per
our standard practice of supply. |
|
| |
|
|
|
|
| |
|
Applications
: |
|
| |
|
This machine is
used for testing the complete leaf spring assembly. The complete
assembly is loaded and unloaded several times and checking is
done for reduction in camber. |
|
| |
|
|
|
|
| |
|
Capacity |
|
| |
|
Machine can be designed as per client requirement |
|
| |
|
|
|
|
|
|
Die and punches |
|
| |
|
Our standard set
of die and punches needed for efficient running of the leaf
spring plant. See list below |
|
| |
|
|
|
| |
|
|
|
|
| |
|
DIES AND PUNCHES NEEDED FOR OPERATING LEAF
SPRING PLANT |
|
| |
|
|
Champer cutting die and punch fitted on 1”
MS Plate with H.C.H.C. blades with allen bolt complete as per
our standard practice of supply. spare top & bottom blade set
required. |
|
| |
|
|
Cover cutting die complete with bottom
blade and upper blade fitted with allen bolts mounted on 1” MS
plate at bottom as per our standard practice of supply. spare
top & bottom blade set required. |
|
| |
|
|
Dimple die & punch fitted on billets with
grub screw with 1” bottom plate suitable for all types of
Leyland leaves as per our standard practice of supply. spare top
& bottom blade set required. |
|
| |
|
|
1210 D Helper cutting die and punch
complete with 1 no. bottom blade and 2 nos. top blade mounted on
1” MS plate. Both sides with bottom blade guide complete As per
our standard practice of supply. spare top & bottom blade set
required. |
|
| |
|
|
Cambering
die & punch complete with bottom MS. Plate of 1” thick with
EN-8. Bottom bars and punch guide complete as per our standard
practice of supply. spare top & bottom blade set required. |
|
| |
|
|
Straightening die & punch made out of
billet steel with top pressing tools for straightening the flat
web wise. |
|
| |
|
|
Straightening
gauge fabricated of heavy duty MS angle duly machined to check
the web straightness of steel flats length 1,500 mm. |
|
| |
|
|
Big tongs 2
meter long
: 2 nos.
Medium tongs for leaf spring plant : 2 nos.
Pushing pipe
: 1 no. |
|
| |
|
|
Flat cutting
machine roller ‘skid out and cut to length stop gauge up to
1,800 mm long. |
|
| |
|
|
Anvil cast
iron 1 no. one side matching and half slot for spring assembly
and machine. |
|
|
|
|
|
|
|
|
|
   |
|
